Mass Save Home Energy Assessment in Massachusetts
Request a Consultation
What Is a Mass Save Home Energy Assessment?
A Mass Save home energy assessment (also called a home energy audit) is a no-cost, 90-to-120-minute visit from a certified home energy specialist who inspects your home to identify where you're losing energy and which upgrades qualify for rebates. The assessment identifies eligible weatherization work. Other offers, such as rebates for qualifying heat pump water heaters, have their own application requirements. EcoSave delivers these assessments as an approved Mass Save® Participating Home Performance Contractor.
The energy assessment costs you nothing. Not a co-pay, not a deposit, not a hidden charge on next month's utility bill. It's fully funded by Massachusetts utilities through the Mass Save® program.

What Happens During Your Home Energy Assessment?
A certified specialist arrives, walks the home with you, inspects five main areas, and typically installs no-cost items during the same visit. Here's what the home energy audit actually looks like.
1. Insulation & Air Leak Inspection
Attic, walls, basement, and rim joist insulation levels get measured. Air leaks around windows, doors, plumbing penetrations, and rim joists get identified - often with a blower-door test to quantify actual leakage rate.
2. Heating & Cooling System Evaluation
Age, efficiency, fuel type, and condition of your furnace, boiler, or heat pump. Central AC or window units get checked too.
3. Water Heater Inspection
Fuel type, age, efficiency, and whether it's a candidate for heat pump water heater replacement.
4. Appliance & Lighting Review
Refrigerators, freezers, dishwashers, laundry, and lighting types. Older appliances often have upgrade rebates available.
5. Knob & Tube and Electrical Check
Presence of active knob and tube wiring, electrical panel condition, and capacity for future upgrades like a heat pump or EV charger.
6. No-Cost Items Installed
Same visit - LED bulbs, a smart thermostat if you don't already have one ($100+ retail value), low-flow showerheads, and aerators. Value typically $200–$400 in items you keep whether you do further work or not.
7. Written Report
You receive a report showing your home's current energy performance, ranked upgrade recommendations, projected savings, and the exact Mass Save® rebate available against each measure.
What You Get From a Mass Save Home Assessment
| What you get | Value |
|---|---|
| Full inspection & written report | No cost |
| Smart thermostat installed on-site (qualifying homes) | $100+ retail value |
| LED bulbs installed throughout home | Included |
| Low-flow showerheads and faucet aerators | Included |
| Access to insulation rebates covering 75–100% | Depends on scope |
| Access to heat pump rebates up to $16,000 | Income-eligible enhanced |
| Access to 0% APR Mass Save HEAT Loan | Up to $25,000 |
| Access to $750 heat pump water heater rebate | On qualifying units |
Mass Save Rebates Start With Your Home Energy Assessment
Use your assessment report to see which insulation and air sealing work is recommended for your home. For equipment upgrades, check the specific program before ordering: the eligible models, installer requirements, application route and deadlines can differ by measure.
Home Energy Audit vs. Home Energy Assessment
In Massachusetts, home energy audit and home energy assessment get used interchangeably, but the Mass Save® program specifically calls its no-cost service a Home Energy Assessment. "Home Energy Audit" is the industry term used elsewhere in the country. Either way, the goal is the same - inspect your home, identify inefficiencies, and produce a written report with recommendations. Mass Save's version is fully funded by your utility.
| Feature | Mass Save Home Energy Assessment | Traditional Home Energy Audit |
|---|---|---|
| Cost | No cost — utility-funded | Typically $200–$600 out of pocket |
| Includes on-site upgrades | Yes — LED bulbs, thermostat, aerators | Usually no |
| Rebate access | Identifies recommended weatherization measures | Depends on program |
| Provider | Mass Save® Participating Contractor | Independent energy auditor |
| Report | Written report with rebate amounts | Written report with recommendations only |
Who Can Get a Mass Save Home Assessment?
Anyone who pays into one of the participating Massachusetts utilities. That covers Eversource, National Grid, Cape Light Compact, Berkshire Gas, Liberty Utilities, and Unitil - most Massachusetts residents. Both homeowners and renters can request an energy assessment, with renters needing landlord approval before any work happens.
Homeowners — direct booking, full program access
Renters — assessment available with landlord authorization for follow-up work
Condominium owners — individual unit assessments available
Multi-family properties (2–4 units) — assessment covers full building
Larger multi-family — different program pathway, ask us at booking
Why Choose EcoSave for Your Mass Save Home Energy Assessment?
| What we bring | What it means |
|---|---|
| Mass Save® Participating HPC | Authorized to run the assessment and follow through with every eligible measure |
| Certified energy specialists | Trained in Massachusetts codes, Mass Save program specifications, and modern building science |
| Multilingual scheduling | Book in English, Português, Español, or 中文 |
| One team from assessment through install | We don't hand you off to a stranger for the actual work |
| Flexible scheduling | Weekday and Saturday appointments available |
Frequently Asked Questions About Mass Save Home Energy Assessment
Yes — fully funded by Massachusetts utilities through the Mass Save® program. You don't pay anything to EcoSave, and Mass Save doesn't add it to your utility bill later. The no-cost items installed during the visit are also fully included.
Typically 90–120 minutes for a standard single-family home. Larger or older homes with more inspection points can run longer. We schedule 2-hour appointment windows to give the specialist time to do the job right. Tell us about any separate attic spaces or additions when you book.
Yes. The specialist needs access to attic, basement, and living spaces, and the walk-through discussion of upgrade options is a key part of the visit. Plan for an adult 18+ to be home for the full appointment. If an attic hatch or a utility room is locked, arrange access before the appointment.
Book online or call (978) 414-6499. Have the property address, utility provider and your available dates handy. If you rent or live in a building with shared systems, mention that when you book so we can explain who needs to take part and what access the specialist will need.
The mass save home assessment is valid for a program-defined period. If your last assessment was 5+ years ago, or if you've since made major renovations, book a new one — rebate amounts and program eligibility have changed and your home's energy profile may have too.
Renters can ask for an assessment. Explain whether you rent a house or an apartment, who pays the utility bill and whether heating is shared. The program can confirm the right route for your building. Get the owner involved before scheduling insulation or other work that changes the property.
Your assessment report identifies recommended improvements. Ask which work qualifies for an incentive, what you would pay and which steps must be completed first. You can review those costs and the application deadlines before deciding whether to do the project in stages.
Find Out Where Your Home Is Losing Energy
Get a no-cost Mass Save Home Energy Assessment and discover where your home can save energy, improve comfort, and qualify for eligible incentives.


